C.M.W. designs and supplies a wide range of automatic irrigation systems to
suit all crops protected and outdoor, edible and ornamental in commercial
and non-commercial settings. The main design parameter is exactly the same
in all these situations --- predictable irrigation performance gives
predictable growing results.
In recent years the use of preformed steel gutters has become very popular
for many hydroponic crops in both glasshouse and polytunnel situations. CMW
has considerable experience in the design and supply of complete gutter
systems, including mains, sub-mains, drippers, climate
control and
fertiliser
injection.
Why not
consider welded rather than glued pipe joins for your irrigation
main? Go here for more about HDPE
pipe and fusion welding.
Trickle Irrigation The
pressure compensated self-locking drip systems, which provide a
uniform and accurate delivery system either to individual plants
or rows of plants. These systems do not drain down and so stay full
between irrigation cycles. When the next watering starts, the drippers
throughout the whole system start immediately. Because they are
pressure compensated, drippers at every position in the system will
deliver exactly the same amount of water.
Water Storage
and Pumping Systems
C.M.W.'s
range of water storage equipment starts with 200 ltr tanks and tops
off with multi-million litre capacity reservoirs. The pumps come
in all shapes and sizes to handle water, dirty water (slurry), liquid
feed and pH modified water. Where the performance from a single
unit needs to be variable, we can supply pumps which will automatically
react to pressure changes and deliver exactly the flow which is
required. Where commercial growers require more sophisticated control
of their watering equipment, we supply an irrigation rig with pH
and EC monitoring and control systems built in.
Overhead
Irrigation
All types of overhead sprinklers can are used in our automatic watering systems. Because
we have extensive contacts with manufacturers, we can match a client's
requirements precisely. For instance where a client is growing a
crop sensitive to droplet damage, we supply sprinklers giving fine
droplets and with anti-drip devices. These prevent the system dripping
and draining onto the crop below and prevent damage. They also ensure
that the system stays full and each sprinkler is ready to start
immediately the valve opens or the pump starts.
Why not
consider welded rather than glued pipe joins for your irrigation
main? Go here for more about HDPE
pipe and fusion welding.
